modular trench heater FRACTAL

FRACTAL modular trench heater

FRACTAL CANAL – special features

  • copper-aluminium exchanger
  • tray, platform frame and trench convector divided into shorter sections (modules)
  • the possibility of assembling a heating channel of any length and desired power
  • the heaters quickly reach their full rated power for a given supply temperature and are characterised by minimum thermal inertia
  • great possibilities of controlling the interior heating – precise heat distribution
  • high efficiency even at low flow temperatures
  • resistance to changeable and high pressure
  • lightweight – easy to transport and install
  • High corrosion resistance
  • high efficiency due to properties of materials used
  • long warranty period – both for open and closed systems
  • can be used as independent or auxiliary heating
  • zone heating
  • easy to install in interiors with complex shapes and high aesthetic requirements
  • high thermal comfort, lower heating costs
  • protects against penetration of cold air into the room
  • Protects glazing from fogging and moisture build-up
Modły grzejnika kanałowego FRACTAL
Depth 100mm
Width 350mm
Modular construction
For condensing boilers
For heat pumps
Small water capacity
Natural convection
Warranty
Eco

FRACTAL CANAL – benefits of use:

  • facilitation of transportation of trench heating elements over long distances by reducing its components to standard dimensions (Europallet)
  • easier storage of trench heaters at points of sale and on building sites
  • possibility of the selection of the final length and the necessary heating power of trench heating directly at the investor’s building site
  • the possibility of independent assembly of complete sets by the investor
  • flexible manoeuvring of the final length of the heating set in the absence of an installation project or in order to adjust the length of the heating channels to the actual conditions of the assembly site

 

FRACTAL modular trench heating is used in:

  • single- and multi-family housing – free arrangement of space, possibility of power supply from the municipal network
  • energy-saving houses – possibility of using in every configuration of central heating system.
  • Frame, timber and log houses – can be installed regardless of the type of flooring, parquet, boards, panels, ceramics, carpet, laminate, stone
  • holiday homes – the heaters can be filled with antifreeze
  • public utilities, care facilities, educational buildings, offices and authorities
  • sacral buildings – active air mixing, uniform temperature distribution, humidity removal
  • Sports facilities, gyms, SPA-type facilities
  • cultural, banking, tourist, commercial and catering facilities
  • warehouses and large building structures, industrial buildings – it is possible to separate zones with different levels of heating, and even to switch off some zones with the option of quick activation
  • buildings of higher humidity, swimming pools, winter gardens – high resistance to corrosion, sets with anodized platforms – 10-year warranty on the exchanger.

Construction of FRACTAL trench heater

Each REGULUS-system FRACTAL CANAL modular underfloor heating set consists of three basic components: the initial module (connection), intermediate modules and the final module. Each of the above-mentioned modules is constructed of a trench trough with a suitable section of the platform frame and a corresponding segment of the copper-aluminium exchanger attached at the factory.

The trench trough and the platform frame, as well as the exchanger segment, are equipped with fasteners to enable their easy, stable and durable connection into a complete set (see figure below).

FRACTAL budowa
I. FRAMING
Manufactured from aluminium profile; anodised in natural aluminium colour (C-0) as standard, or other colours on request.
II. TRENCH TROUGH

Manufactured from galvanised steel; powder-coated RAL 9005 (matte black).
III. EXCHANGER
Made of copper tubes and aluminium fins embedded on them; powder-coated RAL 9005 (matte black).

CONNECTING ELEMENTS
  1. Frame connector
    Element connecting and stabilizing the linearity of the connection of the framing sections of the heating channel platform.
  2. Assembly skid
    Element stabilising the width of the duct’s tray segment, being at the same time the exchanger’s support.
  3. Trench trough connector
    Element connecting individual segments of the heating duct tray and linear stabilization of the exchanger.
  4. Connecting coupler
    Mechanically pressed Viega or Sanha sockets, connecting the copper pipes of the exchanger segments as a whole (supply, passage, return).

STRUCTURE OF THE REGULUS-system CANAL

REGULUS-system CANAL przekrój

Components of the trench heating system::
1. Trench platform
2. Platform framing
3. Trench heat exchanger
4. Trench trough

Floor layers::
1. Flooring
2. Glue
3. Basis
4. Raw concrete
5. Foam, insulation
6. Styrofoam
7. Damp insulation
8. Concrete

TRENCH HEAT EXCHANGER

Trench heat exchanger consist of two systems: a water system and a heat dissipation system.
The water system is made up by a copper exchanger, a pack of evenly distributed horizontal copper heat pipes that are fastened together at the ends with copper cumulative collectors. The pipe-to-collector seal is made by soldering (brazing solder).

The heat dissipation system is made up of horizontal copper pipes closely connected with vertical lamellas of aluminium sheet. These make up a dense system of pipe ribs forming numerous convection trenchs and a wavy surface of the radiator walls.

The combination of copper and aluminium is a dry connection and that is why no electrochemical corrosion occurs in it. The radiators are painted the RAL 9005 powder paint (black matt).

trench heat exchanger

FRACTAL trench heater is available in two ranges: DUO and QUATTRO

DUO TYPE

Technical parameters:

  • total depth of the trench trough including the platform – 100 mm
  • width of the trench trouhg – 300 mm
  • Total width of the platform including the frame – 350 mm
  • any length
Grzejnik kanałowy FRACTAL

QUATTRO TYPE

Technical parameters:

  • total depth of the trench trough including the platform – 150 mm
  • width of the trench trouhg – 300 mm
  • Total width of the platform including the frame – 350 mm
  • any length
Grzejnik kanałowy FRACTAL
Fractal DUO - moduł początkowy - wymiary
Fractal QUATTRO - moduł początkowy - wymiary

FRACTAL system modules

The system FRACTAL CANAL consists of three basic types of modules: initial (1), intermediate (2) and final (3).
The initial module, the final module and a variable number of intermediate modules form complete sets of heating channels with easily calculable, specified lengths and heating outputs.

Moduły systemu Fractal

FIRST MODULE (supply)
A segment of the trench trough with a platform frame with an overall length of 400 mm, with a built-in exchanger module with a 3/4″ GW installation connection and an air vent. On the other side the exchanger is terminated with pipe stubs (DN 15).

Initial modules:
  • for DUO 100 type – designation – DS040
  • for QUATTRO 150 type – designation –  QS040
Fractal-QUATTRO-first module

INTERMEDIATE MODULE (pass-through)

Trench trough segment including platform frame available in four lengths.

The exchanger section installed in the intermediate module has pre-pressed Viega (292 690) or optionally Sanha couplings on one end, and pipe stubs (DN15) on the other end, onto which couplings for the next exchanger section are slid.

Fractal-QUATTRO-600-Intermediate module
Intermediate modules for DUO 100 type (net length) designation:
– DM060 – 600 mm
– DM080 – 800 mm
– DM100 – 1000 mm
– DM120 – 1200 mm
Intermediate modules for type QUATTRO 150 (net length) designation:
– QM060 – 600 mm
– QM080 – 800 mm
– QM100 – 1000 mm
– QM120 – 1200 mm

FINAL MODULE
A trench trough segment with a platform frame of net length 400 mm, with a built-in exchanger module with reversible end collectors.

Final modules:
  • for DUO 100 type – designation – DF040
  • for QUATTRO 150 type – designation – QF040
Fractal-QUATTRO-final module
CONNECTING MODULE
Trench trough section with platform frame, net length 800 mm, containing two exchanger modules: initial and final. It enables making another connection for supplying the next heating element. Using an appropriate number of connecting modules it is possible to assemble a heating channel of any length (over 440 cm for DUO version and over 380 cm for QUATTRO version). The connection openings are located in the side wall of the trench trough.
Connecting modules:
  • for DUO 100 type – designation DC080
  • for QUATTRO 150 type – designation QC080
moduł łączący FRACTAL

TRENCH TROUGH

The trench trough is made of zinc coated and powder painted sheet (RAL 9005, black matt). Trough depth 100 mm. Small depth troughs of the underfloor trench heating system can also be easily installed in the ceiling between the storeys.

Interior width of the trough making up the heating trench: 300 mm. The upper wider portion of the trough forms a flange, on which the framing rests and is installed. The total width of the trough flange including the framing is, respectively 350 mm.

It is possible to tailor the trough width to meet individual customer needs but only for aluminium platforms (exchange or sizing the trough to fit the existing openings in the floor, etc.).

SYSTEMU REGULUS-system CANAL

Trench trough height adjustment system

Each trench trough is equipped with a height adjustment system to facilitate its correct positioning in relation to the target floor height. The height of the tray is adjusted with an Allen screw (ø6) – the adjustment range is from 0 to 30 mm (screws of other lengths can be used). When laying the screed, use mounting spacers or a mounting platform to avoid deformation and changes in the spacing of the framing (more in the download area – installation instructions, installation).

PLATFORM FRAME

Permanently fixed on the trough flange of the heating trench already in the unit completion phase. The upper framing edge defines the depth to which the trough is embedded in the floor. The edge must be perfectly faced with the final floor level. The platform framing is made of aluminium. It transmits the load of the platform to the ground.

The aluminium platform frame is painted or anodized in the same colour as the platform

The timber platform frame is standard painted in chestnut brown (RAL 8015). On request any colour of the platform frame is available without extra cost (RAL K7).

The border is one of two elements (the other is the platform), which remains visible after the heating set is installed in the heating channel.

Grzejnik kanałowy z drewnianym podestem
Wooden platform

Example of a trench heating set with border in colour RAL 1001 and wooden platform of slat type with spacing sleeves in colour RAL 1001.
Visually, the frame plays an equally important role as the platform. It is a pre-assembled element with the duct tray and it is at the stage of purchasing the duct heating set that you should decide on the colour of the border.

A-5a-381x508

TRENCH TROUGH

Depth: 100, 150 mm
Width: 300 mm
Material: galvanised sheet metal
Finish: RAL 9005 (matte black) powder coating
Frame – outer width: 350 mm
Frame material: aluminium

TRENCH HEAT EXCHANGER

Depth: 45, 70 mm
Width: 90 mm
Material: copper tubes, aluminium lamellas
Exchanger coating: powder-coated RAL 9005 (matte black)

SET = EXCHANGER + TRENCH TROUGH WITH FRAME

Depth: 100 mm
Width: 350 mm
Length – minimum: 600 mm, maximum: unlimited
Length of a single element: up to 3000 mm
Operating pressure: 1,5 MPa
Operating temperature: up to +110°С

Connection: GW ¾” Euro cone
Air vent 1/8″ socket
Supply way: from the front of the tray
Supply side: universal (reversible set)

Included in the price of the set:

  • exchanger, trench trough, frame
  • mounting and stabilizing set for the tray
  • brass air vent
  • valve cover

TABLE OF HOW TO ASSEMBLE FRACTAL CANAL SETS FROM THREE BASIC MODULES

The table shows calculation examples up to a length of 3200 mm. Other lengths should be constructed in a similar way. From a length of 4400 mm for DUO version and 3800 mm for QUATTRO version, use connecting modules DC080, QC080.

Segment lengthInitial segment 400mmIntermediate segment 600mmIntermediate segment 800mmIntermediate segment 1000mmIntermediate segment 1200End segment
400mm
Connecting segment 800mm
Duo 100
DS040
DM060
DM080
DM100
DM120
DF040
DC080
[W] 85/75/20
172421577733889234
406

[W] 75/65/20
132324444564684180
312
[W] 55/45/20
6315521227032786
149
QUATTRO 150
QS040
QM060
QM080
QM100
QM120
QF040 
QC080 
[W] 85/75/20
1974846638421021
269
466
[W] 75/65/20
154378518658798
210
365
[W] 55/45/20
78191262332402
106
184

Power chart for FRACTAL trench heater

Total length of the set [mm]Initial segment
DS040/QS040
Initial segment
DM060/QM060
Initial segment
DM080/QM080
Initial segment
DM100/QM100
Initial segment
DM120/QM120
End segment
DF040/QFO40
80011
1400111
1600111
1800111
2000111
22001111
2400121
26001111
2800121
30001111
3200121
Example of FRACTAL CANAL set selection::
1. Room with a heat demand of 2200 W (for parameter 75/65/20)
2. Glazing length 4200 mm.
We analyse the possible combinations of modules in the table above.
Optimum choice, DUO kit
1 x initial module DS 040 – power: 132 W
1 x DF 040 final module – power: 180 W
1 x intermediate module DM 1000 – power: 564 W
2 x intermediate module DM 1200 – power: 684 W x 2 = 1368 W
Total output of the kit: 2244 W. Total length of the set: 4200 mm.

Correction coefficients for REGULUS-system trench heater FRACTAL type DUO 100

 Room temperature
tztp581216202224
9590 0,440,470,500.540.580.610.63
850.460.490.520.570.610.640.67
800.480.510.550.600.650.680.71
750.510.540.580.630.690.720.76
700.540.570.620.670.740.770.81
90850.480.510.550.590.650.670.71
800.510.530.580.630.680.710.75
750.530.560.610.660.730.760.80
700.560.590.650.710.780.810.86
650.590.630.690.750.830.880.93
85800.530.560.610.660.720.760.79
750.560.590.640.700.770.810.85
700.580.620.680.740.820.860.91
650.620.660.720.790.880.930.99
600.660.700.770.850.951.011.07
80750.580.620.670.740.810.860.90
700.610.650.710.790.870.920.97
650.650.690.760.840.940.991.05
600.690.740.810.911.011.081.15
550.740.790.880.981.111.181.27
75700.650.690.760.830.930.981.04
650.680.730.810.891,001.061.13
600.730.780.860.961.081.161.23
550.780.840.931.051.191.271.36
500.830.901.011.151.311.421.53
70650.720.770.860.951.071.141.22
600.770.830.921.031.171.251.34
550.820.890.991.121.281.371.48
500.880.961.081.231.421.531.66
450.951.041.181.361.591.741.91
65600.810.880.981.111.261.351.45
550.870.941.061.201.381.491.61
500.941.021.161.321.541.671.82
60550.931.011.141.301.511.641.78
501,001.091.251.441.681.832.01
451.081.191.371.601.902.092.32
401.191.321.531.812.202.452.76
55501.071.181.351.571.862.042.25
451.171.291.491.762.112.332.61
401.281.421.671.992.452.753.12
351.421.591.902.322.943.373.93
50451.261.401.641.952.372.642.98
401.381.551.832.222.763.133.58
351.541.742.092.593.333.864.56
301.731.992.453.144.285.176.49
45401.511.702.042.503.173.634.22
351.681.922.332.933.854.525.42
301.902.202.753.584.996.137.84
40351.862.142.643.394.585.476.70
302.112.463.134.175.997.519.89

Correction coefficients for REGULUS-system trench heater FRACTAL type QUATTRO 150

 Room temperature
tztp581216202224
95900.470.490.530.560.600.630.65
850.490.510.550.590.630.660.69
800.510.540.570.620.670.700.77
750.530.560.600.650.710.740.77
700.560.590.640.690.750.790.82
90850.510.530.570.620.670.690.72
800.530.560.600.650.700.730.76
750.550.580.630.680.740.780.81
700.580.620.660.720.790.830.87
650.610.650.700.770.840.880.93
85800.550.580.630.680.740.770.81
750.580.610.660.720.780.820.86
700.610.640.700.760.830.870.92
650.640.680.740.810.890.930.99
600.680.720.790.860.961.011.07
80750.600.640.690.750.830.870.91
700.630.670.730.800.880.920.97
650.670.710.780.850.940.991.05
600.710.750.830.911.011.071.14
550.750.800.880.981.101.171.25
75700.670.710.770.840.930.981.04
650.700.750.820.901,001.061.12
600.740.790.870.971.081.141.22
550.790.850.931.041.171.251.33
500.840.911.011.131.291.381.48
70650.740.790.870.961.071.131.20
600.780.840.921.031.151.221.31
550.830.890.991.111.251.341.44
500.890.961.071.211.381.481.60
450.961.041.171.331.541.671.82
65600.830.890.981.101.241.321.41
550.880.951.061.191.351.451.56
500.941.021.141.301.491.611.74
60550.931.011.131.281.471.581.71
501,001.091.221.401.621.751.91
451.081.181.341.551.821.982.18
401.171.291.481.742.082.302.57
55501.071.161.321.521.781.942.12
451.151.261.451.682,002.202.43
401.251.391.611.902.302.552.87
351.381.541.812.182.723.093.56
50451.241.371.581.852.222.462.75
401.351.501.752.092.572.883.27
351.491.671.982.423.063.504.08
301.671.892.302.903.854.605.68
45401.471.641.942.342.923.313.80
351.621.832.202.713.504.064.80
301.822.082.553.274.445.376.76
40351.782.022.463.104.104.845.84
302,002.312.883.765.266.508.38

Correction coefficients for REGULUS-system trench heater FRACTAL type QUATTRO 200/270

 Room temperature
tztp581216202224
95900.460.480.510.550.590.620.64
850.480.500.540.580.620.650.69
800.500.520.560.610.660.690.72
750.520.550.590.640.700.730.76
700.550.580.630.680.740.780.82
90850.500.520.560.600.660.680.71
800.520.550.590.640.690.720.76
750.540.570.620.670.730.770.81
700.570.600.650.710.780.820.86
650.600.640.690.760.840.880.93
85800.540.570.620.670.730.760.80
750.570.600.650.710.770.810.85
700.600.630.690.750.830.870.91
650.630.670.730.800.880.930.99
600.670.710.780.860.951.011.07
80750.590.630.680.750.820.860.91
700.620.660.720.790.870.920.97
650.660.700.770.850.940.991.05
600.700.750.820.911.011.071.14
550.740.800.880.981.101.181.26
75700.660.700.760.840.930.981.04
650.690.740.810.901.001.061.12
600.730.790.870.961.081.151.22
550.780.840.931.041.181.261.35
500.840.901.011.141.301.401.51
70650.730.780.860.961.071.141.21
600.770.830.921.031.161.231.32
550.830.890.991.111.261.351.46
500.880.961.071.221.401.511.63
450.951.041.181.351.571.701.86
65600.820.880.981.101.251.341.43
550.870.951.061.201.371.471.58
450.941.021.151.311.511.641.78
60550.931.011.141.291.491.601.74
501.001.091.231.421.641.791.96
451.081.191.351.571.862.042.25
401.181.301.511.772.142.372.66
55501.071.171.341.541.821.982.18
451.161.281.471.722.052.262.51
401.261.401.641.942.372.642.98
351.401.571.852.252.823.223.73
50451.251.381.601.902.292.552.86
401.371.521.792.152.662.993.41
351.511.702.042.503.193.674.30
301.701.942.373.014.054.866.05
45401.491.671.982.413.043.464.00
351.651.872.262.823.664.275.08
301.862.142.643.414.705.727.25
40351.822.0792.553.244.325.136.24
302.052.382.993.955.606.969.07

Description:
tz – Flow temperature
tp – Return temperature

In the description of the heater parameters tz appears as the first value, tp as the second, and the room temperature as the third, e.g. 55/45/20

To calculate the heating power for non-standard supply parameters, divide the heating power for parameter 75/65/20 by the value read from the correction factor table.

For example, we are looking for the heating power for the S6/60 radiator for the parameter 70/50/20. The power for 75/65/20 is 922 W. In the table of correction factors, we read the coefficient for: tz = 70, tp = 50, room temperature = 20. In the table of correction coefficients read the value of the coefficient for: tz = 70, tp = 50, room temperature = 20. For these parameters the coefficient is: 1,246.
Therefore: 922/1,246 ≈740 W

VARIANT I = thermostatic valve + shut-off valve

WARIANT I- zawór termostatyczny prosty

STRAIGHT THERMOSTATIC VALVE ½’’
without setting, M30x1,5
Product code VAZTP15BN

WARIANT I - zawór odcinający prosty

STRAIGHT SHUT-OFF VALVE ½ “
Product code VAZOFPDN15

VARIANT II A = VARIANT I + the following control elements

Distant-06C set – actuator mounted on the thermostatic valve connected by capillary (2 m) to the head mounted outside the duct.

WARIANT IIA - GŁOWICA distant

THERMOSTATIC HEAD DISTANT-06C
with remote sensor
Product code VAGD06

VARIANT II B = VARIANT I + the following control elements

Siemens RTN81 unit – a servo-motor installed on the thermostatic valve and connected on the capillary with a head installed outside the trench

wariant II Siemens

THERMOSTATIC HEAD SIEMENS RTN81
remote, 2 m
Product code SIRTN1

VARIANT III = VARIANT I + the following control elements

Wireless digital ZigBee network temperature controller HTRP-RF(50) enables temperature control via CO10RF coordinating unit in offline mode or via Internet gateway in online mode (UGE600-sold separately), it can be configured to work with electronic head (TRV). When using the UGE600 internet gateway – controllable via the SALUS Smart Home app.

Features:

  • built-in energy-saving TPI control algorithm
  • three temperature levels
  • additional functions: PARTY and HOLIDAY
  • possibility to work in manual mode (permanently or temporarily)
  • VP function – protects thermostatic valves against freezing
  • memory backup in case of power failure
WARIANT-III-SALUS HTRP_RF(50)011

SALUS HTRP-RF(50)
ZigBee network temperature controller,
Dimensions: 85 x 85 x 25,
power supply: 2xAA.
Product code SA023

WARIANT-III-SALUS CO10RF_006

SALUS CO10RF
Zig-Bee network coordinator (Offline),
can handle a maximum of 30 regulators,
9 skirting boards and 90 heater heads.
Product code SA027

WARIANT-III-SALUS TRV10RFM_008

SALUS TRV10RFM
ZigBee wireless thermostatic head – M30x1.5,
power supply: 2xAA.
Product code SA024

VARIANT IV = VARIANT I + the following control elements

A wireless set AURATON 200 TRA consists of an electronic head and a temperature regulator (backlit LCD display). It enables a precise and effective regulation of temperature in rooms (daily cycle). One regulator may cooperate with any number of TRA heads.

Features:

  • extended vacation mode
  • service switch
  • calibration of temperature and time indications
  • possibility of working in on/off or PWM mode
  • suitable for installation on M30x1.5 radiator inserts
WARIANT IV Auraton-TRA-2

AURATON 200 TRA
set consisting of temperature regulator
and electronic head, power supply: 2xAAA.
Product code AURTRARIG

WARIANT IV Auraton-TRA-2

AURATON TRA HEAD
electronic head.
Product code AURTRAG

The platform (colloquially grill, grille, grate) is made of aluminium or wood and serves to cover the heating trench.

  • transverse (the rungs are arranged across the duct axis), distances: 7, 10, or 13 mm
  • the platform is the only visible component of the trench heating system
  • it can be made of aluminium of wood.
  • aluminium platform rungs can be placed across the trench – fix (stiff) version or roll (rollable)
  • aluminium platform rungs can be placed along the trench only in fix (stiff) version
  • wooden platforms – across the trench – only in roll version
  • roll verison – comfortable solution, for trench maintance, transport and storage after season
  • fix version best checks in case of short platforms
  • large density of rungs – 7mm distance – installation on busy communication routes

Rolled platforms facilitate access to the inside of the duct during cleaning, as well as storage of the platform when it is replaced by an after-season platform, after the heating period has ended.
On request, fixed platforms and platforms with rungs along the duct axis are available.

Aluminium platform

The standard aluminium platform with rungs aligned across the channel axis is available in three rung spacing variants: 7, 10 or 13 mm (the density of the profiles in the platform affects its price).

The profiles, spacing sleeves and platform frame are supplied in pearl silver or any RAL K7 colour required by the customer (at no extra charge).

The frame of the platform, which is a pre-assembled element with the duct tray, is always, as a standard, painted the same colour as the ordered platform, provided that a complex order for the set with the platform is placed at the same time. After installing the trench heating set in the heating channel and inserting the platform, the platform with its frame will be visible in the floor plane.

RUNG PROFILE OF THE ALUMINIUM PLATFORM
Rung height: 18,50 mm
Height of the platform frame: 24,50 mm
Distance between rungs: 7, 10, 13 mm

The aluminium platforms are available with three rung distances: 7, 10 or 13 mm

Anodized aluminium platform

A separate method of coating aluminium platforms is anodising. It is an electrochemical process consisting in the creation of an aluminium oxide layer on the surface of aluminium platforms as a result of applying electric current to the platforms immersed in a solution of the appropriate acid (sulphuric, chromic, oxalic).
The oxide coating partially grows into the aluminium and partially covers the anodised component. Anodising increases the resistance of the platform surface to corrosion, abrasion and chemical agents. The profiles and the frame of the platforms are anodised.

There are four colour versions to choose from: C-0 – natural, C-31 – inox, C-33 – olive, C-35 – black, with three variants for the distance between the rungs: 7, 10 or 13 mm

C-33 – olive

C-31 – inox

C-0 – natural

C-35 – black

Wooden platforms

Wooden platforms are made of high quality wood: oak and beech. They are impregnated with 50% solution of colourless nitro lacquer. On order it is possible to make platforms of non-impregnated wood. Wooden platforms are available only in rolled version. The offer includes two patterns: “bone” and “slat”. The distance between the rungs is 17 mm for the “bone” pattern and 11 mm for the “slat” pattern. The “slat” design is not available for a width of 400 mm.

WOODEN RUNG “BONE” – TOP VIEW
Rung height: 20 mm
Platform frame height: 25 mm
Distance between rungs: 17 mm

WOODEN RUNG “SLAT” – TOP VIEW
Rung height: 20 mm
Platform frame height: 25 mm
Distance between rungs: 11 mm

Platform spacers in the “slat” design and the tub surrounds in the “slat” and “bone” designs are made of aluminium and painted chestnut brown (RAL 8015) as standard.

BEECH “BONE”

beech slat wooden platform

BEECH “SLAT”

OAK “BONE”

OAK “SLAT”

In the case of wooden platforms on request, both the platform sleeves and the tub surround can be painted in another RAL K7 colour (at no extra charge) or remain unpainted.

When choosing a new colour for the sockets you must also remember to specify the colour of the frame (the frame of the platform will be visible on the floor after the platform has been placed on the heating channel). The frame is the element factory-assembled with the duct tray and it is at the stage of purchasing the duct heating set that you should decide on the colour of the frame.

OAK “SLAT” – frame and sleeves RAL 1001

OAK “SLAT” – framing and sleeves silver

BEECH “BONE” – frame RAL 1001

POST-SEASON PLATFORM

For installation outside the heating season (spring, summer, autumn) in place of the openwork platform (extends its life). It masks and protects the tray with exchanger placed in the floor against dirt. The user fills the empty post-season platform with the material of the floor surrounding the canal or in any other way. The platform can be filled in maintaining the drawing of the floor (e.g. the same arrangement of ceramic tiles or parquet staves).

The post-season platform is made of aluminium and painted in a standard pearl silver colour or, according to the customer’s wishes, in any colour from the RAL K7 palette (without an extra charge); it can also be anodised in one of the four colours offered

The post-season platform can be used as a spacer during the assembly of the trench heating set – it must be placed upside down while the screed is being poured – it also protects the trench interior against dirt during construction works.
The post-season platform is made in short lengths, up to a maximum of 1.4 metres.

POST-SEASON PLATFORM – PROFILE CROSS-SECTION AND FILLING LAYER
Inner height: 15,50 mm
External height: 20 mm
Frame material: aluminium
Supporting material: galvanised sheet steel

EMPTY POST-SEASON PLATFORM
An empty post-season platform – frame and bottom made of sheet – the user fills in with the same material as the floor surrounding the channel, creating a full post-season platform.

FILLED IN POST-SEASON PLATFORM
The platform can be filled in keeping the drawing of the floor, e.g. the same arrangement of panels.

It is possible to make a set of heating channels connected by corners, the angle of corners being any between 90° and 180°. The channel corner consists of a tray, frame and platform (offered only as a set).

The free space in the corner tray can be used for installation of connections, valves and controllers.

aluminium-4-300x225
aluminium-5-300x225
aluminium-3-300x168

ALUMINIUM CORNER PLATFORM
Width: 250, 300, 350 i 400 mm
distance between rungs: 7, 10 lub 13 mm
painted – RAL colours K7
anodized – C-0 – natural, C-31 – inox, C-33 – olive, C-35 – black

nar-drewno-kosc-300x157

WOODEN CORNER PLATFORM – “BONE”
Width: 250, 300, 350 i 400 mm
distance between rungs: 17 mm
wood: oak, beech – impregnated or raw
frame: painted (RAL K7 colours)

nar-drewno-listwa-300x157

WOODEN CORNER PLATFORM – “SLAT”
Width: 250, 300, 350 i 400 mm
distance between rungs: 17 mm
wood: oak, beech – impregnated or raw
frame: painted (RAL K7 colours)

SET OF ALUMINIUM PLATFORMS CONNECTED AT CORNERS – ANGLE OVER 90°

SET OF WOODEN PLATFORMS OF “SLAT” TYPE CONNECTED BY CORNERS – ANGLE OVER 90°

In case of the corner channel, the whole set must be ordered together as a set (i.e. with the platform, also out of season) and assembled as a set. In the production process we keep the correct dimension of all channel set elements, so that the complete channel set has the correct dimension.
When installing the tray alone without the corner platforms, a slight angle change may occur, which makes it impossible to fit the platform frame later, especially in the corner. If all the components of the system are used at the same time during installation and the installation spacers are used, there is no possibility of installation error – non-axial installation or deformation of the tray.
An additional difficulty, in the case of aluminium platforms, is the first (shortest) rung, which is a composite element with the channel frame.

Along with the order for angle modules, it is necessary to send the necessary technical drawing with the given angle. The drawing should indicate the position of the heaters and the places where the connections are to be led out, so that the openings in the baths are prepared in the desired, optimum place for the installer.

The drawing should contain the following data:

  • dimensioned all elements of the corner element(s)
  • the length of the corner arms on the long side
  • angles of the corners
  • the width of the platform
  • depth of the channel
  • position relative to the glazing

WARRANTY 25 YEARS!!!

REGULS®-system trench heat exchangers are covered by 25 year warranty. The warranty covers tightness of heater’s water system. The lifespan of Reguluses is comparable to lifespan of copper installation and can reach even tens of years!

TERMS OF WARRANTY

REGULUS-system s.j. seated in Bielsko-Biała on 51 Grażyńskiego street, hereby grants warranty on its products: water central unit heaters REGULUS-system.

The producer declares, that heaters REGULUS-system are manufactured according to demands of European standard EN-442. 

The warranty given by producer, includes tightness of heater water system. The period of warranty is differentiated according to the place the heaters are used in:

WARRANTY 25 YEARS on trench heat exchanger (heater), installed in objects characterized by microclimate specific for residential or office areas. 

WARRANTY 10 YEARS on trench heat exchanger (heater), installed in objects with above average humidity and increased sanitary regime, such as swimming pools, laundries, drying rooms, vessels, service locales or any other industrial objects, including harbor infrastructure. 

WARRANTY 2 YEARS on remaining elements of the system (platforms, trenchs, frames)

  1. The following warranty does not hamper nor suspend buyers rights, resulting from product inconsistence with purchase agreement.
  2. Warranty entitlements of the client, must be implemendeted via company, in which the purchase was made. Directly at the producer, only in case, were the point of sale was liquidated.
  3. The Warranty begins with the date of the purchase, shown on the proof of purchase. Warranty rights, without showing the proof of purchase together with confirmed Warranty Card, will not be respected.
  4. In case of event covered by warranty, during period covered by warranty, the complaining User has the rights to replace the product on new of the same type.
  5. New product will be issued to User in place of filing a complaint, in 14 days from the date of notification. The user is bound to return the faulty product, unless the event has place during ongoing heating season. In that case, the return will occur after actual exchange.
  6. The producer will cover the cost of replacement of the product on new, free of faults, after receiving the appropriate bill. The value of such service must be previously agreed upon with the producer.
  7. Modulating valves and fans are covered by Warranties given by their producer.
  8. The producer is not responsible for size disparity between platform and frame caused by installation error. Platforms and frames are fit loosely ( about 1 mm). Inner platform frame width is strict and equals:
    For SOLO product line – 243 mm;
    For DUO, QUATTRO product line – 343;
    For DUBEL product line – 393 mm;
    For TRIOVENT, QUATTROVENT – 293 mm.
  9. The warrant of trouble-free work of trench heating system is keeping heating trenches clean.
  10. REGULUS®-system company reserves right to make changes to its products without prior notice.

WARRANTY DOES NOT COVER

  1. Defects, resulting from misuse of the product. Acceptable installation work parameters:  water temperature – 110°C, working pressure – 1,5 MPa.
  2. Defects and inconveniences resulting from inappropriate assembly (inconsistency with assembly manual, attached with the product) and improper hydraulic adjustment of heater and pollution of water in installation.
  3. Defects resulting in inappropriate electrical connection or as a result of surges in power supplying installation.
  4. Mechanical defects.
  5. The warranty expires immediately, when User or anyone else, without permission, conducts modifications or repairs of REGULUS-system products.
  6. Warranty expires, when central heating installation, in which REGULUS-system heaters are connected is absent of mechanical filter, mounted on water feed.
  7. Warranty does not cover normal operational activities, connected with using the products, such as it’s connection or cleaning.
  8. Wooden platforms – stored or exploited in inappropriate way – in high humidity environment or without proper chemical protection of the wood. Warranty does not cover natural wearing off of the products (platforms, frames). Warranty does not cover natural work of wooden platforms.

DOES NOT AFFECT COURSE OF WARRANTY

  1. Setting up any kind of divisor, on outer surface of REGULUS-system heaters,
  2. Installing REGULUS-system heaters in open central heating stytems.
  3. Installing heaters in installations powered directly from city heating system, without  mediation of heat exchanger.
  4. Periodic flushing off the water form c.h. installation, as long as other elements of the installation permit such operation, and it will not cause their corrotion.
User receiving product together with this Warranty Card accepts all of the above terms of the granted warranty. 
Cross section
Technical data

TABLE OF HOW TO ASSEMBLE FRACTAL CANAL SETS FROM THREE BASIC MODULES

The table shows calculation examples up to a length of 3200 mm. Other lengths should be constructed in a similar way. From a length of 4400 mm for DUO version and 3800 mm for QUATTRO version, use connecting modules DC080, QC080.

Segment lengthInitial segment 400mmIntermediate segment 600mmIntermediate segment 800mmIntermediate segment 1000mmIntermediate segment 1200End segment
400mm
Connecting segment 800mm
Duo 100
DS040
DM060
DM080
DM100
DM120
DF040
DC080
[W] 85/75/20
172421577733889234
406

[W] 75/65/20
132324444564684180
312
[W] 55/45/20
6315521227032786
149
QUATTRO 150
QS040
QM060
QM080
QM100
QM120
QF040 
QC080 
[W] 85/75/20
1974846638421021
269
466
[W] 75/65/20
154378518658798
210
365
[W] 55/45/20
78191262332402
106
184

Power chart for FRACTAL trench heater

Total length of the set [mm]Initial segment
DS040/QS040
Initial segment
DM060/QM060
Initial segment
DM080/QM080
Initial segment
DM100/QM100
Initial segment
DM120/QM120
End segment
DF040/QFO40
80011
1400111
1600111
1800111
2000111
22001111
2400121
26001111
2800121
30001111
3200121
Example of FRACTAL CANAL set selection::
1. Room with a heat demand of 2200 W (for parameter 75/65/20)
2. Glazing length 4200 mm.
We analyse the possible combinations of modules in the table above.
Optimum choice, DUO kit
1 x initial module DS 040 – power: 132 W
1 x DF 040 final module – power: 180 W
1 x intermediate module DM 1000 – power: 564 W
2 x intermediate module DM 1200 – power: 684 W x 2 = 1368 W
Total output of the kit: 2244 W. Total length of the set: 4200 mm.
Correction coefficients

Correction coefficients for REGULUS-system trench heater FRACTAL type DUO 100

 Room temperature
tztp581216202224
9590 0,440,470,500.540.580.610.63
850.460.490.520.570.610.640.67
800.480.510.550.600.650.680.71
750.510.540.580.630.690.720.76
700.540.570.620.670.740.770.81
90850.480.510.550.590.650.670.71
800.510.530.580.630.680.710.75
750.530.560.610.660.730.760.80
700.560.590.650.710.780.810.86
650.590.630.690.750.830.880.93
85800.530.560.610.660.720.760.79
750.560.590.640.700.770.810.85
700.580.620.680.740.820.860.91
650.620.660.720.790.880.930.99
600.660.700.770.850.951.011.07
80750.580.620.670.740.810.860.90
700.610.650.710.790.870.920.97
650.650.690.760.840.940.991.05
600.690.740.810.911.011.081.15
550.740.790.880.981.111.181.27
75700.650.690.760.830.930.981.04
650.680.730.810.891,001.061.13
600.730.780.860.961.081.161.23
550.780.840.931.051.191.271.36
500.830.901.011.151.311.421.53
70650.720.770.860.951.071.141.22
600.770.830.921.031.171.251.34
550.820.890.991.121.281.371.48
500.880.961.081.231.421.531.66
450.951.041.181.361.591.741.91
65600.810.880.981.111.261.351.45
550.870.941.061.201.381.491.61
500.941.021.161.321.541.671.82
60550.931.011.141.301.511.641.78
501,001.091.251.441.681.832.01
451.081.191.371.601.902.092.32
401.191.321.531.812.202.452.76
55501.071.181.351.571.862.042.25
451.171.291.491.762.112.332.61
401.281.421.671.992.452.753.12
351.421.591.902.322.943.373.93
50451.261.401.641.952.372.642.98
401.381.551.832.222.763.133.58
351.541.742.092.593.333.864.56
301.731.992.453.144.285.176.49
45401.511.702.042.503.173.634.22
351.681.922.332.933.854.525.42
301.902.202.753.584.996.137.84
40351.862.142.643.394.585.476.70
302.112.463.134.175.997.519.89

Correction coefficients for REGULUS-system trench heater FRACTAL type QUATTRO 150

 Room temperature
tztp581216202224
95900.470.490.530.560.600.630.65
850.490.510.550.590.630.660.69
800.510.540.570.620.670.700.77
750.530.560.600.650.710.740.77
700.560.590.640.690.750.790.82
90850.510.530.570.620.670.690.72
800.530.560.600.650.700.730.76
750.550.580.630.680.740.780.81
700.580.620.660.720.790.830.87
650.610.650.700.770.840.880.93
85800.550.580.630.680.740.770.81
750.580.610.660.720.780.820.86
700.610.640.700.760.830.870.92
650.640.680.740.810.890.930.99
600.680.720.790.860.961.011.07
80750.600.640.690.750.830.870.91
700.630.670.730.800.880.920.97
650.670.710.780.850.940.991.05
600.710.750.830.911.011.071.14
550.750.800.880.981.101.171.25
75700.670.710.770.840.930.981.04
650.700.750.820.901,001.061.12
600.740.790.870.971.081.141.22
550.790.850.931.041.171.251.33
500.840.911.011.131.291.381.48
70650.740.790.870.961.071.131.20
600.780.840.921.031.151.221.31
550.830.890.991.111.251.341.44
500.890.961.071.211.381.481.60
450.961.041.171.331.541.671.82
65600.830.890.981.101.241.321.41
550.880.951.061.191.351.451.56
500.941.021.141.301.491.611.74
60550.931.011.131.281.471.581.71
501,001.091.221.401.621.751.91
451.081.181.341.551.821.982.18
401.171.291.481.742.082.302.57
55501.071.161.321.521.781.942.12
451.151.261.451.682,002.202.43
401.251.391.611.902.302.552.87
351.381.541.812.182.723.093.56
50451.241.371.581.852.222.462.75
401.351.501.752.092.572.883.27
351.491.671.982.423.063.504.08
301.671.892.302.903.854.605.68
45401.471.641.942.342.923.313.80
351.621.832.202.713.504.064.80
301.822.082.553.274.445.376.76
40351.782.022.463.104.104.845.84
302,002.312.883.765.266.508.38

Correction coefficients for REGULUS-system trench heater FRACTAL type QUATTRO 200/270

 Room temperature
tztp581216202224
95900.460.480.510.550.590.620.64
850.480.500.540.580.620.650.69
800.500.520.560.610.660.690.72
750.520.550.590.640.700.730.76
700.550.580.630.680.740.780.82
90850.500.520.560.600.660.680.71
800.520.550.590.640.690.720.76
750.540.570.620.670.730.770.81
700.570.600.650.710.780.820.86
650.600.640.690.760.840.880.93
85800.540.570.620.670.730.760.80
750.570.600.650.710.770.810.85
700.600.630.690.750.830.870.91
650.630.670.730.800.880.930.99
600.670.710.780.860.951.011.07
80750.590.630.680.750.820.860.91
700.620.660.720.790.870.920.97
650.660.700.770.850.940.991.05
600.700.750.820.911.011.071.14
550.740.800.880.981.101.181.26
75700.660.700.760.840.930.981.04
650.690.740.810.901.001.061.12
600.730.790.870.961.081.151.22
550.780.840.931.041.181.261.35
500.840.901.011.141.301.401.51
70650.730.780.860.961.071.141.21
600.770.830.921.031.161.231.32
550.830.890.991.111.261.351.46
500.880.961.071.221.401.511.63
450.951.041.181.351.571.701.86
65600.820.880.981.101.251.341.43
550.870.951.061.201.371.471.58
450.941.021.151.311.511.641.78
60550.931.011.141.291.491.601.74
501.001.091.231.421.641.791.96
451.081.191.351.571.862.042.25
401.181.301.511.772.142.372.66
55501.071.171.341.541.821.982.18
451.161.281.471.722.052.262.51
401.261.401.641.942.372.642.98
351.401.571.852.252.823.223.73
50451.251.381.601.902.292.552.86
401.371.521.792.152.662.993.41
351.511.702.042.503.193.674.30
301.701.942.373.014.054.866.05
45401.491.671.982.413.043.464.00
351.651.872.262.823.664.275.08
301.862.142.643.414.705.727.25
40351.822.0792.553.244.325.136.24
302.052.382.993.955.606.969.07

Description:
tz – Flow temperature
tp – Return temperature

In the description of the heater parameters tz appears as the first value, tp as the second, and the room temperature as the third, e.g. 55/45/20

To calculate the heating power for non-standard supply parameters, divide the heating power for parameter 75/65/20 by the value read from the correction factor table.

For example, we are looking for the heating power for the S6/60 radiator for the parameter 70/50/20. The power for 75/65/20 is 922 W. In the table of correction factors, we read the coefficient for: tz = 70, tp = 50, room temperature = 20. In the table of correction coefficients read the value of the coefficient for: tz = 70, tp = 50, room temperature = 20. For these parameters the coefficient is: 1,246.
Therefore: 922/1,246 ≈740 W

Control

VARIANT I = thermostatic valve + shut-off valve

WARIANT I- zawór termostatyczny prosty

STRAIGHT THERMOSTATIC VALVE ½’’
without setting, M30x1,5
Product code VAZTP15BN

WARIANT I - zawór odcinający prosty

STRAIGHT SHUT-OFF VALVE ½ “
Product code VAZOFPDN15

VARIANT II A = VARIANT I + the following control elements

Distant-06C set – actuator mounted on the thermostatic valve connected by capillary (2 m) to the head mounted outside the duct.

WARIANT IIA - GŁOWICA distant

THERMOSTATIC HEAD DISTANT-06C
with remote sensor
Product code VAGD06

VARIANT II B = VARIANT I + the following control elements

Siemens RTN81 unit – a servo-motor installed on the thermostatic valve and connected on the capillary with a head installed outside the trench

wariant II Siemens

THERMOSTATIC HEAD SIEMENS RTN81
remote, 2 m
Product code SIRTN1

VARIANT III = VARIANT I + the following control elements

Wireless digital ZigBee network temperature controller HTRP-RF(50) enables temperature control via CO10RF coordinating unit in offline mode or via Internet gateway in online mode (UGE600-sold separately), it can be configured to work with electronic head (TRV). When using the UGE600 internet gateway – controllable via the SALUS Smart Home app.

Features:

  • built-in energy-saving TPI control algorithm
  • three temperature levels
  • additional functions: PARTY and HOLIDAY
  • possibility to work in manual mode (permanently or temporarily)
  • VP function – protects thermostatic valves against freezing
  • memory backup in case of power failure
WARIANT-III-SALUS HTRP_RF(50)011

SALUS HTRP-RF(50)
ZigBee network temperature controller,
Dimensions: 85 x 85 x 25,
power supply: 2xAA.
Product code SA023

WARIANT-III-SALUS CO10RF_006

SALUS CO10RF
Zig-Bee network coordinator (Offline),
can handle a maximum of 30 regulators,
9 skirting boards and 90 heater heads.
Product code SA027

WARIANT-III-SALUS TRV10RFM_008

SALUS TRV10RFM
ZigBee wireless thermostatic head – M30x1.5,
power supply: 2xAA.
Product code SA024

VARIANT IV = VARIANT I + the following control elements

A wireless set AURATON 200 TRA consists of an electronic head and a temperature regulator (backlit LCD display). It enables a precise and effective regulation of temperature in rooms (daily cycle). One regulator may cooperate with any number of TRA heads.

Features:

  • extended vacation mode
  • service switch
  • calibration of temperature and time indications
  • possibility of working in on/off or PWM mode
  • suitable for installation on M30x1.5 radiator inserts
WARIANT IV Auraton-TRA-2

AURATON 200 TRA
set consisting of temperature regulator
and electronic head, power supply: 2xAAA.
Product code AURTRARIG

WARIANT IV Auraton-TRA-2

AURATON TRA HEAD
electronic head.
Product code AURTRAG

Platforms

The platform (colloquially grill, grille, grate) is made of aluminium or wood and serves to cover the heating trench.

  • transverse (the rungs are arranged across the duct axis), distances: 7, 10, or 13 mm
  • the platform is the only visible component of the trench heating system
  • it can be made of aluminium of wood.
  • aluminium platform rungs can be placed across the trench – fix (stiff) version or roll (rollable)
  • aluminium platform rungs can be placed along the trench only in fix (stiff) version
  • wooden platforms – across the trench – only in roll version
  • roll verison – comfortable solution, for trench maintance, transport and storage after season
  • fix version best checks in case of short platforms
  • large density of rungs – 7mm distance – installation on busy communication routes

Rolled platforms facilitate access to the inside of the duct during cleaning, as well as storage of the platform when it is replaced by an after-season platform, after the heating period has ended.
On request, fixed platforms and platforms with rungs along the duct axis are available.

Aluminium platform

The standard aluminium platform with rungs aligned across the channel axis is available in three rung spacing variants: 7, 10 or 13 mm (the density of the profiles in the platform affects its price).

The profiles, spacing sleeves and platform frame are supplied in pearl silver or any RAL K7 colour required by the customer (at no extra charge).

The frame of the platform, which is a pre-assembled element with the duct tray, is always, as a standard, painted the same colour as the ordered platform, provided that a complex order for the set with the platform is placed at the same time. After installing the trench heating set in the heating channel and inserting the platform, the platform with its frame will be visible in the floor plane.

RUNG PROFILE OF THE ALUMINIUM PLATFORM
Rung height: 18,50 mm
Height of the platform frame: 24,50 mm
Distance between rungs: 7, 10, 13 mm

The aluminium platforms are available with three rung distances: 7, 10 or 13 mm

Anodized aluminium platform

A separate method of coating aluminium platforms is anodising. It is an electrochemical process consisting in the creation of an aluminium oxide layer on the surface of aluminium platforms as a result of applying electric current to the platforms immersed in a solution of the appropriate acid (sulphuric, chromic, oxalic).
The oxide coating partially grows into the aluminium and partially covers the anodised component. Anodising increases the resistance of the platform surface to corrosion, abrasion and chemical agents. The profiles and the frame of the platforms are anodised.

There are four colour versions to choose from: C-0 – natural, C-31 – inox, C-33 – olive, C-35 – black, with three variants for the distance between the rungs: 7, 10 or 13 mm

C-33 – olive

C-31 – inox

C-0 – natural

C-35 – black

Wooden platforms

Wooden platforms are made of high quality wood: oak and beech. They are impregnated with 50% solution of colourless nitro lacquer. On order it is possible to make platforms of non-impregnated wood. Wooden platforms are available only in rolled version. The offer includes two patterns: “bone” and “slat”. The distance between the rungs is 17 mm for the “bone” pattern and 11 mm for the “slat” pattern. The “slat” design is not available for a width of 400 mm.

WOODEN RUNG “BONE” – TOP VIEW
Rung height: 20 mm
Platform frame height: 25 mm
Distance between rungs: 17 mm

WOODEN RUNG “SLAT” – TOP VIEW
Rung height: 20 mm
Platform frame height: 25 mm
Distance between rungs: 11 mm

Platform spacers in the “slat” design and the tub surrounds in the “slat” and “bone” designs are made of aluminium and painted chestnut brown (RAL 8015) as standard.

BEECH “BONE”

beech slat wooden platform

BEECH “SLAT”

OAK “BONE”

OAK “SLAT”

In the case of wooden platforms on request, both the platform sleeves and the tub surround can be painted in another RAL K7 colour (at no extra charge) or remain unpainted.

When choosing a new colour for the sockets you must also remember to specify the colour of the frame (the frame of the platform will be visible on the floor after the platform has been placed on the heating channel). The frame is the element factory-assembled with the duct tray and it is at the stage of purchasing the duct heating set that you should decide on the colour of the frame.

OAK “SLAT” – frame and sleeves RAL 1001

OAK “SLAT” – framing and sleeves silver

BEECH “BONE” – frame RAL 1001

POST-SEASON PLATFORM

For installation outside the heating season (spring, summer, autumn) in place of the openwork platform (extends its life). It masks and protects the tray with exchanger placed in the floor against dirt. The user fills the empty post-season platform with the material of the floor surrounding the canal or in any other way. The platform can be filled in maintaining the drawing of the floor (e.g. the same arrangement of ceramic tiles or parquet staves).

The post-season platform is made of aluminium and painted in a standard pearl silver colour or, according to the customer’s wishes, in any colour from the RAL K7 palette (without an extra charge); it can also be anodised in one of the four colours offered

The post-season platform can be used as a spacer during the assembly of the trench heating set – it must be placed upside down while the screed is being poured – it also protects the trench interior against dirt during construction works.
The post-season platform is made in short lengths, up to a maximum of 1.4 metres.

POST-SEASON PLATFORM – PROFILE CROSS-SECTION AND FILLING LAYER
Inner height: 15,50 mm
External height: 20 mm
Frame material: aluminium
Supporting material: galvanised sheet steel

EMPTY POST-SEASON PLATFORM
An empty post-season platform – frame and bottom made of sheet – the user fills in with the same material as the floor surrounding the channel, creating a full post-season platform.

FILLED IN POST-SEASON PLATFORM
The platform can be filled in keeping the drawing of the floor, e.g. the same arrangement of panels.

Platform corner

It is possible to make a set of heating channels connected by corners, the angle of corners being any between 90° and 180°. The channel corner consists of a tray, frame and platform (offered only as a set).

The free space in the corner tray can be used for installation of connections, valves and controllers.

aluminium-4-300x225
aluminium-5-300x225
aluminium-3-300x168

ALUMINIUM CORNER PLATFORM
Width: 250, 300, 350 i 400 mm
distance between rungs: 7, 10 lub 13 mm
painted – RAL colours K7
anodized – C-0 – natural, C-31 – inox, C-33 – olive, C-35 – black

nar-drewno-kosc-300x157

WOODEN CORNER PLATFORM – “BONE”
Width: 250, 300, 350 i 400 mm
distance between rungs: 17 mm
wood: oak, beech – impregnated or raw
frame: painted (RAL K7 colours)

nar-drewno-listwa-300x157

WOODEN CORNER PLATFORM – “SLAT”
Width: 250, 300, 350 i 400 mm
distance between rungs: 17 mm
wood: oak, beech – impregnated or raw
frame: painted (RAL K7 colours)

SET OF ALUMINIUM PLATFORMS CONNECTED AT CORNERS – ANGLE OVER 90°

SET OF WOODEN PLATFORMS OF “SLAT” TYPE CONNECTED BY CORNERS – ANGLE OVER 90°

In case of the corner channel, the whole set must be ordered together as a set (i.e. with the platform, also out of season) and assembled as a set. In the production process we keep the correct dimension of all channel set elements, so that the complete channel set has the correct dimension.
When installing the tray alone without the corner platforms, a slight angle change may occur, which makes it impossible to fit the platform frame later, especially in the corner. If all the components of the system are used at the same time during installation and the installation spacers are used, there is no possibility of installation error – non-axial installation or deformation of the tray.
An additional difficulty, in the case of aluminium platforms, is the first (shortest) rung, which is a composite element with the channel frame.

Along with the order for angle modules, it is necessary to send the necessary technical drawing with the given angle. The drawing should indicate the position of the heaters and the places where the connections are to be led out, so that the openings in the baths are prepared in the desired, optimum place for the installer.

The drawing should contain the following data:

  • dimensioned all elements of the corner element(s)
  • the length of the corner arms on the long side
  • angles of the corners
  • the width of the platform
  • depth of the channel
  • position relative to the glazing
Warranty

WARRANTY 25 YEARS!!!

REGULS®-system trench heat exchangers are covered by 25 year warranty. The warranty covers tightness of heater’s water system. The lifespan of Reguluses is comparable to lifespan of copper installation and can reach even tens of years!

TERMS OF WARRANTY

REGULUS-system s.j. seated in Bielsko-Biała on 51 Grażyńskiego street, hereby grants warranty on its products: water central unit heaters REGULUS-system.

The producer declares, that heaters REGULUS-system are manufactured according to demands of European standard EN-442. 

The warranty given by producer, includes tightness of heater water system. The period of warranty is differentiated according to the place the heaters are used in:

WARRANTY 25 YEARS on trench heat exchanger (heater), installed in objects characterized by microclimate specific for residential or office areas. 

WARRANTY 10 YEARS on trench heat exchanger (heater), installed in objects with above average humidity and increased sanitary regime, such as swimming pools, laundries, drying rooms, vessels, service locales or any other industrial objects, including harbor infrastructure. 

WARRANTY 2 YEARS on remaining elements of the system (platforms, trenchs, frames)

  1. The following warranty does not hamper nor suspend buyers rights, resulting from product inconsistence with purchase agreement.
  2. Warranty entitlements of the client, must be implemendeted via company, in which the purchase was made. Directly at the producer, only in case, were the point of sale was liquidated.
  3. The Warranty begins with the date of the purchase, shown on the proof of purchase. Warranty rights, without showing the proof of purchase together with confirmed Warranty Card, will not be respected.
  4. In case of event covered by warranty, during period covered by warranty, the complaining User has the rights to replace the product on new of the same type.
  5. New product will be issued to User in place of filing a complaint, in 14 days from the date of notification. The user is bound to return the faulty product, unless the event has place during ongoing heating season. In that case, the return will occur after actual exchange.
  6. The producer will cover the cost of replacement of the product on new, free of faults, after receiving the appropriate bill. The value of such service must be previously agreed upon with the producer.
  7. Modulating valves and fans are covered by Warranties given by their producer.
  8. The producer is not responsible for size disparity between platform and frame caused by installation error. Platforms and frames are fit loosely ( about 1 mm). Inner platform frame width is strict and equals:
    For SOLO product line – 243 mm;
    For DUO, QUATTRO product line – 343;
    For DUBEL product line – 393 mm;
    For TRIOVENT, QUATTROVENT – 293 mm.
  9. The warrant of trouble-free work of trench heating system is keeping heating trenches clean.
  10. REGULUS®-system company reserves right to make changes to its products without prior notice.

WARRANTY DOES NOT COVER

  1. Defects, resulting from misuse of the product. Acceptable installation work parameters:  water temperature – 110°C, working pressure – 1,5 MPa.
  2. Defects and inconveniences resulting from inappropriate assembly (inconsistency with assembly manual, attached with the product) and improper hydraulic adjustment of heater and pollution of water in installation.
  3. Defects resulting in inappropriate electrical connection or as a result of surges in power supplying installation.
  4. Mechanical defects.
  5. The warranty expires immediately, when User or anyone else, without permission, conducts modifications or repairs of REGULUS-system products.
  6. Warranty expires, when central heating installation, in which REGULUS-system heaters are connected is absent of mechanical filter, mounted on water feed.
  7. Warranty does not cover normal operational activities, connected with using the products, such as it’s connection or cleaning.
  8. Wooden platforms – stored or exploited in inappropriate way – in high humidity environment or without proper chemical protection of the wood. Warranty does not cover natural wearing off of the products (platforms, frames). Warranty does not cover natural work of wooden platforms.

DOES NOT AFFECT COURSE OF WARRANTY

  1. Setting up any kind of divisor, on outer surface of REGULUS-system heaters,
  2. Installing REGULUS-system heaters in open central heating stytems.
  3. Installing heaters in installations powered directly from city heating system, without  mediation of heat exchanger.
  4. Periodic flushing off the water form c.h. installation, as long as other elements of the installation permit such operation, and it will not cause their corrotion.
User receiving product together with this Warranty Card accepts all of the above terms of the granted warranty. 
Download